Grouting Aid

DESCRIPTION:

AT-GROUTING AID is specially formulated hydrogen-free grouting aid. It is free-flowing powder for addition to neat cement slurry. It plasticises the mix allowing for substantial reduction in water content without affecting the fluidity, thus improving the strength and impermeability of the grout. During the setting period of the grout it produces controlled expansion to compensate the normal drying shrinkage of cement. It ensures complete filing of voids and prevents formation of porous sections. Due to its surface-active property and volume increase during reaction even the smallest cracks and pores can be impregnated.

USES:

• AT-GROUTING AID is used as an admixture for injection grouting to effectively waterproof and stop leaks in underground structures, basements, tunnels, lift wells, retaining walls, dams, water reservoirs, pressure ducts and other water retaining structures. It is also recommended for grouting pre-stressed members and wherever a non-settling, non-bleeding, expanding grout is required.

METHOD OF USE:

• AT-GROUTING AID is admixed with neat cement slurry of suitable consistency and injected under pressure preferably by a positive displacement pump through nozzles.
• The surface of concrete/rock should be properly sealed / packed to prevent the grout from oozing out.
• AT-GROUTING AID should be mixed uniformly with dry cement.

DOSAGE:

• AT-GROUTING AID dosage varies from 0.5 to 2.0% by weight of dry cement. The optimum dose depends on the nature of the work

TECHNICAL DATA:

PACKAGING & STORAGE:

• AT-GROUTING AID is available in the following pack:
  • 12.50 kg PACK
• Shelf life is 12 months in sealed containers as provided
• Protect AT-GROUTING AID from direct sunlight
• Keep containers sealed and away from heat and cold in a well ventilated area

HEALTH & SAFETY:

• Protect hands with rubber gloves and eyes with goggles.
• Accidental splashes to the skin or eyes must be rinsed immediately with clean water.
• Store in well-labeled containers.