DESCRIPTION:
AT-VISGIL 71S is a new generation of concrete admixture based on a blend of specially selected high molecular weight poly-carboxylates and organic polymers. STANDARD: AT-VISGIL 71S complies with IS: 9103-1999, IS-2645-1975 and ASTM C-494 Type F
USES:
- AT-VISGIL 71S is suitable for the production of precast concrete.
- AT-VISGIL 71S facilitates extreme water reduction, excellent flow ability, at the same time ensures optimal cohesion and highest self compaction behavior.
- AT-VISGIL 71S is used for the following types of concrete:
- Precast Concrete
- Self Compacting Concrete(S.C.C)
- Concrete with highest water reduction (upto40%)
- High strength concrete
- High water reduction, excellent flowability, coupled with high early strength
- Have positive influence on the above mentioned applications.
TECHNICAL DATA:
APPEARANCE & FORM | Brow Liquid |
SPECIFIC GRAVITY (27ºC) | 1.11±0.02 |
pH VALUE | 7±1 |
SOLID CONTENT (%) | 34% – 38% |
ASH CONTENT | 2.6% – 3.0% |
SOLUABLE CHLORIDE (%) | < 0.02% |
VISCOCITY (CPS) | 200 |
COMPABILITY | Can be used with all types of Portland and Slag cements including Sulphate resistant cement Important: Always conduct trials before combining products in specific mixes and contact our Technical Service Department for information about specific combinations. |
(All technical data stated herein is based on tests carried out under laboratory condition)
CONSISTENCY:
- AT-VISGIL 71S is formulated from carefully selected raw materials and is manufactured under control conditions to produce a consistent product
HANDLING:
- AT-VISGIL 71S is formulated from chemicals, which present no fire or health hazard
DOSAGE:
- For soft plastic concrete 0.4-0.6% by weight of cement
- For flowing self-compacting concrete (S.C.C) 0.6–1.2% by weight of cement
- Actual dosage to be finalized on the basis of site trials.
RATE OF ADDITION:
- With small dosage the increment of slump is more
- The dosage depends on the cement content and the W/C ratio
ADDITION:
- AT-VISGIL 71S is added to the gauging water or simultaneously with it poured into the concrete mixer.
- For optimum utilization of the high water reduction we recommend thorough mixing at a minimal wet mixing time of 60seconds.
- The addition of the remaining gauging water to fine-tune the concrete consistency- may only be started after 2/3 minutes of the wet mixing time to, to avoid surplus water in the concrete.
PACKAGING & STORAGE:
- AT-VISGIL 71S is available in the following pack:
- Shelf life is 12 months from date of production if stored properly in undamaged, unopened, original sealed packaging, in dry conditions at temperatures between +5°C and +30°C
- Keep containers sealed and away from heat and cold in a well ventilated area
- Protect from direct sunlight and frost
- Stir material well before use
HEALTH & SAFETY:
- Protect hands with rubber gloves and eyes with goggles.
- This chemical is harmless to human body.
- Accidental splashes to the skin or eyes must be rinsed immediately with clean water.
- Store in well-labeled containers.
- Non dangerous goods, please observe Material Safety datasheet.