IWP

DESCRIPTION:

AT – IWP is a concrete/mortar admixture in liquid form that acts both as highly efficient plasticiser and waterproofing compound.

STANDARDS:

AT-IWP complies with IS: 2645 and IS: 9103.

USES:

• AT – IWP is used for structural and mass concrete
  • Roof slabs
  • Canals
  • Dams and reservoirs
  • Sewerage works
  • Water Tanks
  • Sunken Portions

ADVANTAGES:

• Improve water tightness
• It increases the workability of concrete without increase in water contents
• Chloride free-hence does not attack reinforcement

INSTRUCTION FOR USE:

• AT-IWP liquid should be added to the mixing water prior to its addition to concrete.
• Recommended dosage is 200 gms per bag of cement.
• Determine the quantity of water depending upon CEMENT:SAND ratio for mortars or WATER:CEMENT ratio for concrete.
• Add measured quantity of AT-IWP depending on the cement content and then mix the same with water. Then add the solution to the dry mix.

TECHNICAL DATA:

PACKAGING & STORAGE:

• AT-IWP is available in 5 KG/ 10 KG / 20 KG container
• Shelf life is 1 year in original & sealed packing
• Keep packing in cool, dry place away from heat, cold and moisture
• Stir material well before use

HEALTH & SAFETY:

• Protect hands with rubber gloves and eyes with goggles.
• Accidental splashes to the skin or eyes must be rinsed immediately with clean water.
• Store in well-labeled containers.
• If required get medical attention.