Debond 120

DESCRIPTION:

AT-DEBOND 120 ready to use Bentonite modified liquid paraffin curing compound to prevent premature water loss from concrete and also used in segmental de-molding. STANDARD: AT-DEBOND 120 compiles with ASTM C 309 USES: AT-DEBOND 120 form a thin film barrier over the newly laid surface to prevent premature water loss. It is particularly useful in areas like:

• Concrete highways
• Retaining walls
• Columns
• Canal linings
• Runways etc

ADVANTAGES:

AT-DEBOND 120 provide the following beneficial properties:

• Ensures uniform and efficient curing
• Reduces dusting
• Ensures achievement of desired strength
• Pre-cast segment can be easily stripped off from form-work
• Reduces shrinkage cracks
• Highly advantageous where there is scarcity of water particularly during summer
• Where desired quality control is very poor

COVERAGE:

• AT-DEBOND 120 is sprayed on the newly laid concrete @ 0.10 – 0.20 kg/sq.mtr. (depending upon the nature of surface)

APPLICATION:

• AT-DEBOND 120 is sprayed on freshly laid concrete once the surface water has disappeared.
• It can be applied with the help of a spray gun and for larger areas automatic equipment is recommended.
• The material has to be stirred well prior to application.

PHYSICAL PROPETIES:

PACKAGING & STORAGE:

• AT-DEBOND 120 is available in the following packing
  • 50 kg & 200 kg (HDPE Barrel)
• Shelf life is 6 months in sealed containers as provided
• Keep containers sealed and away from heat and cold in a well ventilated area
• Stir material well before use

HEALTH & SAFETY:

• Protect hands with rubber gloves and eyes with goggles.
• Accidental splashes to the skin or eyes must be rinsed immediately with clean water.
• Store in well-labeled containers.
• If required get medical attention.